• Phone +91-9051202216
  • World’s Leading Industrial Solution Provider

Pressure Blaster Machine - Cabinet Type

Super Blast - SB

Works on INDUCTION - SUCTION principle of abrasive delivery. The super blaster ensures continuous working and no interruption in blasting cycle. Recommended for light and medium sized components where surface is to be cleaned or deburred or to impart with fine matte finish. Useful for heat treatment shops, tool, die and mould makers and shot peening of light metal components etc. SB machines are incorporated with reclaimer which ensures uniform cleaning and finishing each time and in every next operation. This is achieved by an automatic system of abrasive cleaning and separation built into the reclaimer. Dust and debris are separated and only clean and sized abrasives are carried to clast gun-ensuring a homogeneous finishing. Most cabinets of other make do not have the reclaimer as standard practice.

Pressure Blaster - PB

Works on DIRECT PRESSURE principle of blasting, the pressure blaster produces high abrasive velocity resulting to cleaning of job at faster rate. A pressure vessel directly bolted below hopper of cabinet has automatic abrasive refilling arrangement. A tubular fabric bag type dust collector with generous filter area is attached with cabinet as standard feature for high efficiency of dust collection. A manual shaker is also provided for bag shaking PB is recommended for fast cleaning, for removal of heavy rust and corrosion using coarse abrasive, it is most suitable for etching the surface needed for rubber-lining. FRP lining and metal spaying. Castings and forgings are cleaned speedily. Blast pressure can be controlled from 30 to 90 psig. Almost all types of coarse and medium size abrasives can be used depending upon application.

Wet Blaster - WB

Works on INDUCTION - SUCTION principle of blasting. The most important point in wet blasting is its ability to use very fine abrasive - as fine as 5 microns. Fine abrasive are suspended in liquid, usually water and then pumped to a nozzle as a slurry. At nozzle, the slurry is introduced into air - stream and propelled against job. The glandless slurry pump is used to feed the slurry at positive pressure into blast gun. The wetter parts of pump are of thermoset plastic material for corrosion resistance. WB machine is useful in tool room to remove feather burrs multi-tooth cutting tools, such as, milling cutter holes, broaches and taps eliminating hours of hand honing time. It deburrs intersecting holes in precision parts which are inaccessible by any other method. The finest machined surface can be super-finished without damage to sharp edges and exact tolerances.

Technical Specification:

Model Pressure Blaster(PB) Super Blaster(SB) Wet Blaster(WB)
PB - 9182 PB - 12090 PB - 150120 SB - 6060 SB - 9182 SB - 12090 WB - 9182 WB - 12090
Working Chamber (mm)
Height
Weight
Depth
775
910
820
900
1200
900
900
1500
1200
600
600
600
775
910
820
900
1200
900
775
900
820
900
1200
900
Door Opening (mm)
Weight
Height
730
675
800
800
1100
800
500
500
730
675
800
800
730
675
800
800
Overall Dimension (mm)
Height
Weight
Depth
2130
1100
2500
2030
1365
2430
2080
1665
2730
1660
800
1500
2120
1070
1400
2570
1365
1700
1940
1070
1500
2235
1365
1700
Dust or Mist Collector or
Reclaimer Fan Motor HP Fan Capacity (M3/min) Fan Capacity (CFM) Filter Cloth Area (M2) Slurry Pump Motor (HP) Airjet Orifice (mm) Blast Nozzle (mm)
1.0
14.16
500
7.5
---
---
*5,6
1.0
14.16
500
7.5
---
---
*5,6
1.5
22.66
500
7.5
---
---
*5,6
0.5
5.66
200
1.0
---
*2,3
*6,8
1.0
11.32
400
2.0
---
*3,4,5.5
*8,10,12
1.5
16.98
600
4.0
---
3,*4,5.5
8,*10,12
0.5
5.66
200
---
1.0
*3,4,5.5
*8,10,12
1.0
11.32
400
---
1.0
*3,4,5.5
*8,10,12
Abrasive Storage Capacity
Litres (CFT)
Pit Size (mm)
Weight
Length
Depth
Weight in Kg (approx.)
28 (1.0)


---


*5,6
42 (1.5)


600
2180
510
650
42 (1.5)


900
2530
600
760
28 (1.0)


---


250
28 (1.0)


---


380
42 (1.5)


---


490
42 (1.5)


---


400
42 (1.5)


---


525
Abrasive Feed Direct Pressure Induction Suction Glanless Pump